Auxiliary Controllers
- Controls a vehicle’s A/C compressor clutch, heat valve, and fans.
- High current digital outputs.
- Dedicated inputs for two analogue temperature sensors - internal and external.
- Pulsed Width Modulation (PWM) for blower fan outputs.
- Automatic and manual modes of operation.
- Integrates control with Ultraview display.
- Configurable input/output.
- Multi-voltage.
- Voltage: 9-32V
- CAN: SAE J1939
-
Current Rating: Fan - 25A Max.
AC Clutch - 15A Max.
Heat Valve - 15A Max. - Body: Powder-coated Steel
- Approvals: SAE J1113
- Operating Temp: -40°C to 85°C
- Provides remote connection to compatible devices.
- Multi-carrier 4G LTE connectivity.
- Dual SIM card port (2x Mini 2FF).
- Multiple communication ports.
- Routing capabilities provide secure, reliable communication.
- Triggers alarms and sends SMS messages.
- Built-in GPS.
- Built-in Ethernet and serial connectivity.
- Data usage alerts via email/sms.
- Low power consumption.
- Made in North America.
- Voltage: 7-30V
- Current Draw: 0.15A @ 13.8V
- CPU: 32-bit ARM9 400 MHz
- Memory: 512MB NAND
- RAM: 128MB
- Ethernet: 10/100 Base-T RJ45 Ports
- Serial: RS-232 (DB9) 115,200bps
- Antenna: 4x SMA Connectors
-
Approvals: FCC/IC
UL HazLoc
PTCRB - Operating Temp: -40°C to 85°C
- Collect data on critical components and vehicle health providing insight to keep systems in optimal working order.
- Decrease vehicle downtime with electronics troubleshooting and support.
- Real-time notifications, run-log recording, and secure over-the-air device updates.
- Integrates with IDEX rescue tools – show current tool cycle and condition for optimal maintenance.
- As soon as a trouble code is detected, a notification is sent to the designated recipient so they can quickly prioritise breakdown repairs.
- Vehicle comparison mode makes decisions in fleet deployment simple.
- Powered by Microsoft’s cloud computing platform Azure.
- Voltage: 9–32V
- Current Draw: 5A @ 13.8V
- CAN: J1939
- Construction: Aluminium
- Ingress Protection: IP67
- Operating Temp: -40°C to 85°C
Catalogue Downloads
- Utilises SAE J1939 CAN standard to record NFPA required data.
- Retains last 100 hours of stored data in memory.
- Internal real-time clock with 10 year battery
- back-up.
- Integrates with Seat Belt Warning System to record seating data.
- 32-bit ARM processor.
- Software available for quick & easy data retrieval. Supplied upon request.
- USB connector for data retrieval via VDR management software.
- Monitors and records Engine RPM, Throttle percentage, Vehicle speed, ABS events, Transmission range information, Parking brake position, Master warning position, Seatbelt status.
- Voltage: 9-32V
- Current Draw: 55mA @ 13.8V
- Output: 250mA per Output
- CAN: SAE J1939
- Material: Polycarbonate
- IP Rating: IP67
- Approvals: SAE J1113
- Operating Temp: -40°C to 85°C
