IONNIC Minebar 750mm

  • New streamline minebar range featuring all premium products including:
    –  IONNIC 103 LED beacon.
    –  Brigade tonal reverse alarms.
  • Designed and manufactured in Australia from high quality components.
  • All minebars equipped with ADR approved IONNIC LED combination lamps – stop, tail, indicator & reverse lamps. 
  • Extruded aluminium bar providing greater strength and adaptability.
  • Multi-voltage.
  • Voltage: 12-24V
  • Length: 750mm
  • Beacon Type: IONNIC 103 LED
  • Reverse Alarm: Brigade Tonal 97dB(A)
  • Signal Lamp Type: IONNIC Slimline LED
  • Base: Powder Coated Aluminium
  • Harness: 4m
  • New streamline minebar range featuring all premium products including:
    –  IONNIC 103 LED beacon.
    –  Brigade tonal reverse alarms.
  • Designed and manufactured in Australia from high quality components.
  • All minebars equipped with ADR approved IONNIC LED combination lamps – stop, tail, indicator & reverse lamps. 
  • Extruded aluminium bar providing greater strength and adaptability.
  • Dual magentic mounts for low speed application only.
  • Multi-voltage.
  • Voltage: 12-24V
  • Length: 750mm
  • Beacon Type: IONNIC 103 LED
  • Reverse Alarm: Brigade Tonal 97dB(A)
  • Signal Lamp Type: IONNIC Slimline LED
  • Mount: Dual vacuum magnetic
  • Base: Powder Coated Aluminium
  • Harness: 4m
  • Developed to control lighting and other electronic automotive accessories.
  • Incorporates the latest in onboard circuit protection and monitoring technology.
  • 3 user configurable master switches.
  • All switches can be set to latching or momentary.
  • Mounting point on back of switch panel – use with common 1/4" thread adjustable mounts.
  • Epoxy encapsulated receiver module for enhanced moisture and vibration protection.
  • Includes 4 decals.
  • 8 outputs (6A each).
  • Multiple outputs can be combined to allow switching of high current loads.
  • Eliminates excess wiring.
  • Multi-voltage.
  • Compact design.
  • Voltage: 10-24V
  • Circuits: 8 Individual
    3 Programmable
  • Current Rating: 6A Max. per circuit
    40A Total
  • Materials: ABS
  • Controller Harness: 4.5m
  • Operating Temp: -40°C to 85°C
  • Note: Kit Contents:
    1 x Switch Panel
    1 x Receiver Module
    4 x Overlay Function Decals
  • Significantly reduce the time required for each Minebar. 
  • Connects to the CAN, providing functionality for a Minebar (stop-tail/indicator/reverse lights, and reversing alarm).
  • Kits utilise the non-intrusive Contactless CAN Adaptor to access OEM signals.
  • Vehicle warranty concerns alleviated as no physical connection is made to existing CAN wiring.
  • Ultra-compact Microplex CAN controller with holder rated to IP67.
  • Microplex is pre-programmed to be compatible with the Ford Ranger/Everest system.
  • Configurations: Ford Ranger & Everest
  • Voltage: 12–24V
  • CAN: SAE J1939
    CAN Open
    DeviceNet
    NMEA 2000
  • Current Draw: 35mA @ 24V
  • Operating Temp: -40­­°C to 70°C
  • Significantly reduce the time required for each Minebar and Hand Brake Alarm installation. 
  • Connects to the CAN, providing functionality for a Hand Brake Alarm and Minebar (stop-tail/indicator/reverse lights, and reversing alarm).
  • Kits utilise the non-intrusive Contactless CAN Adaptor to access OEM signals.
  • Vehicle warranty concerns alleviated as no physical connection is made to existing CAN wiring.
  • Ultra-compact Microplex CAN controller with holder rated to IP67.
  • Microplex is pre-programmed to be compatible with the Ford Ranger/Everest system.
  • Configurations: Ford Ranger & Everest
    Inc. Hand Brake Alarm
  • Voltage: 12–24V
  • CAN: SAE J1939
    CAN Open
    DeviceNet
    NMEA 2000
  • Current Draw: 35mA @ 24V
  • Operating Temp: -40­­°C to 70°C