MatrixGOVERNOR II

  • SAE J1939 compliant stand-alone fully functional pressure governor module.
  • Monitors discharge pressure and maintains set pressure by reducing or increasing 
  • engine RPM.
  • Hard wired interlocks (throttle ready, pump engaged, ok to pump). 
  • Increase, decrease, idle, mode (pressure or RPM), preset, high idle inputs.
  • Programmable default mode (pressure, RPM or none).
  • Self-diagnostic options – sends out alarms and warnings when error or fault 
  • conditions occur.
  • Made in North America.
  • Voltage: 9-32V
  • Current Draw: 50mA @ 13.8V
  • Output Current: 250 mA
  • CAN: SAE J1939
  • Material: Polycarbonate
  • IP Rating: IP67
  • Operating Temp: -40°C to 85°C