CAN Controllers

  • Use as I/O module in a CAN network as well as a stand-alone and intelligent programmable controller.
  • Fully programmable using graphical software. For more info contact your local reseller on 1800 724 690.
  • Environmentally sealed – IP67 / IP6K8.
  • Highly flexible multifunction inputs.
  • Microplex – world's smallest CAN controllers. Footprint of two micro 280 series relays.
  • Holder kits specifically designed for Microplex range available – environmentally seal to IP67.
  • Short circuit & overcurrent protection.
  • Made in Europe.
  • Multi-voltage.
  • Voltage: 9-32V
  • Outputs: 4, 7 & 8 Models
  • CAN: 2.0 A/B ISO 11898-2
    SAE J1939
  • Housing Material: Microplex
    PA66 Nylon
    CC16WP
    Polymer
  • IP Rating: Microplex
    IP67
    CC16WP
    IP6K8
  • Approvals: SAE J1113
    ISO 11452
  • Operating Temp: -40°C to 85°C
  • Significantly reduce the time required for each Minebar. 
  • Connects to the CAN, providing functionality for a Minebar (stop-tail/indicator/reverse lights, and reversing alarm).
  • Kits utilise the non-intrusive Contactless CAN Adaptor to access OEM signals.
  • Vehicle warranty concerns alleviated as no physical connection is made to existing CAN wiring.
  • Ultra-compact Microplex CAN controller with holder rated to IP67.
  • Microplex is pre-programmed to be compatible with the Ford Ranger/Everest system.
  • Configurations: Ford Ranger & Everest
  • Voltage: 12–24V
  • CAN: SAE J1939
    CAN Open
    DeviceNet
    NMEA 2000
  • Current Draw: 35mA @ 24V
  • Operating Temp: -40­­°C to 70°C
  • Significantly reduce the time required for each Minebar and Hand Brake Alarm installation. 
  • Connects to the CAN, providing functionality for a Hand Brake Alarm and Minebar (stop-tail/indicator/reverse lights, and reversing alarm).
  • Kits utilise the non-intrusive Contactless CAN Adaptor to access OEM signals.
  • Vehicle warranty concerns alleviated as no physical connection is made to existing CAN wiring.
  • Ultra-compact Microplex CAN controller with holder rated to IP67.
  • Microplex is pre-programmed to be compatible with the Ford Ranger/Everest system.
  • Configurations: Ford Ranger & Everest
    Inc. Hand Brake Alarm
  • Voltage: 12–24V
  • CAN: SAE J1939
    CAN Open
    DeviceNet
    NMEA 2000
  • Current Draw: 35mA @ 24V
  • Operating Temp: -40­­°C to 70°C
  • Microplex – world's smallest CAN controllers. Footprint of two micro 280 series relays.
  • Use as I/O module in a CAN network as well as a stand-alone and intelligent programmable controller.
  • Fully programmable using graphical software.
  • Environmentally sealed – IP67 / IP6K8.
  • Highly flexible multifunction inputs.
  • Holder kits specifically designed for Microplex range available – environmentally seal to IP67.
  • Short circuit & overcurrent protection.
  • Made in Europe.
  • Multi-voltage.
  • Voltage: 8-32V
  • Outputs: 4 & 7 Models
  • CAN: CAN 2.0
    SAE J1939
  • Housing Material: PA66 Nylon
  • IP Rating: IP67
  • Operating Temp: -40°C to 85°C
  • Use as I/O module in a CAN network as well as a stand-alone and intelligent programmable controller.
  • Multiple inputs/outputs.
  • 2 x CAN ports.
  • 32-bit processor with 65K RAM.
  • Fully programmable using graphical software.
  • Environmentally sealed – IP67 / IP6K8.
  • Highly flexible multifunction inputs.
  • Short circuit & overcurrent protection.
  • Made in Europe.
  • Multi-voltage.

  • Voltage: 9-32V
  • Inputs: 7
  • Outputs: 8
  • CAN: CAN 2.0
    SAE J1939
  • Housing Material: PA66 Nylon
  • IP Rating: IP6K8
  • Operating Temp: -40°C to 85°C
  • Use as I/O module in a CAN network as well as a stand-alone and intelligent programmable controller.
  • Secondary port options include RS485, LIN (Slave), CAN/FD, or an additional CAN.
  • Compact design – 30 x 30 x 40mm.
  • 32-bit processor with 256K RAM for the ESW-00057.
  • Fully programmable using graphical software.
  • Environmentally sealed – IP67 / IP6K8.
  • Highly flexible multifunction inputs.
  • Short circuit & overcurrent protection.
  • Made in Europe.
  • Multi-voltage.
  • Voltage: 9-32V
    8–16V
  • Inputs: 1 & 2 Models
  • Outputs: 1 & 2 Models
  • CAN: CAN 2.0
    SAE J1939
  • Housing Material: PA66 Nylon
  • IP Rating: IP6K8K
  • Operating Temp: -40°C to 85°C
  • Use as I/O module in a CAN network as well as a stand-alone and intelligent programmable controller.
  • Integrated TE DEUTSCH connector for harsh environmental conditions.
  • Up to 4 analogue outputs.
  • Fully programmable using graphical software.
  • Environmentally sealed – IP67 / IP6K8.
  • Highly flexible multifunction inputs.
  • Short circuit & overcurrent protection.
  • Made in Europe
  • Multi-voltage.
  • Voltage: 9-32V
    7-32V
  • Inputs: 2 & 4 Models
  • Outputs: 2 & 4 Models
  • CAN: CAN 2.0
    SAE J1939
  • Housing Material: PA66 Nylon
  • IP Rating: IP6K8K
  • Operating Temp: -40°C to 85°C
  • Use as I/O module in a CAN network as well as a stand-alone and intelligent programmable controller.
  • Potential-free relay functionality.
  • Compact design – 30 x 30 x 40mm.
  • 32-bit processor with 32K RAM.
  • Fully programmable using graphical software.
  • Environmentally sealed – IP67 / IP6K8.
  • Highly flexible multifunction inputs.
  • Short circuit & overcurrent protection.
  • Made in Europe
  • Multi-voltage.
  • Voltage: 9-32V
  • Inputs: 1
  • Outputs: 1
  • CAN: CAN 2.0
    SAE J1939
  • Housing Material: PA66 Nylon
  • IP Rating: IP6K8K
  • Operating Temp: -40°C to 85°C
  • Use as I/O module in a CAN network as well as a stand-alone and intelligent programmable controller.
  • Potential-free relay functionality.
  • Up to 12 relays can be activated.
  • Fully programmable using graphical software.
  • Environmentally sealed – IP67 / IP6K8.
  • Highly flexible multifunction inputs.
  • Short circuit & overcurrent protection.
  • Made in Europe
  • Multi-voltage.
  • Voltage: 9-30V
  • Inputs: 13
  • Outputs: 12
  • CAN: CAN 2.0
    SAE J1939
  • Housing Material: Polymer
  • Operating Temp: -40°C to 85°C
  • Use as I/O module in a CAN network as well as a stand-alone and intelligent programmable controller.
  • Controls up to three DC motors with precise ramp functions. 
  • H-Bridge functionality.
  • Multiple inputs/outputs.
  • 32-bit processor with 256K RAM. 
  • Versatile inputs with 10 analogue inputs (8 MFI) available. 
  • Fully programmable using graphical software.
  • Environmentally sealed – IP67 / IP6K8.
  • Highly flexible multifunction inputs.
  • Short circuit & overcurrent protection.
  • Made in Europe
  • Multi-voltage.
  • Voltage: 8-32V
  • Inputs: 10 (8 MFI)
  • Outputs: 8
  • CAN: CAN 2.0
    SAE J1939
  • Housing Material: Polymer
  • Operating Temp: -40°C to 85°C