Miscellanies
- LED illumination.
- Multi-voltage.
- Centre style illumination.
- Epoxy filled electronics for enhanced moisture & vibration protection.
- Reverse polarity protected.
- Variety of colours.
- LR01 load resistor maybe required when used as an alternator warning light.
- Voltage: 12-24V
- Body: Stainless Steel
- Mount: Ø 12mm
- IP Rating: IP65 (face only)
- Light Source: LED
- Approvals: CE, RoHS
-
Colours :
Catalogue Downloads
- LED illumination.
- Multi-voltage.
- Ring and centre style illumination.
- Epoxy filled electronics for enhanced moisture & vibration protection.
- Reverse polarity protected.
- Variety of colours.
- LR01 load resistor maybe required when used as an alternator warning light.
- Voltage: 12-24V
- Body: Stainless Steel
- Mount: Ø 19mm
- IP Rating: IP65 (face only)
- Light Source: LED
- Approvals: CE, RoHS
-
Colours :
Catalogue Downloads
- LED illumination.
- Multi-voltage.
- Epoxy filled electronics for enhanced moisture & vibration protection.
- Reverse polarity protected.
- Environmentally sealed - IP67.
- Variety of colours.
- Voltage: 12-24V
- Body: Polymer
- Mount: Ø 16mm
- IP Rating: IP67 (face only)
- Light Source: LED
- Approvals: CE, RoHS
-
Colours :
Catalogue Downloads
- Bosch & Lucas style heat start switches.
- Die-cast & polymer models.
- Multi-voltage.
- Voltage: 6-36V
- IP Rating: IP65
- Terminals: Blade
-
Body: Die-cast
Polymer
Catalogue Downloads
- 4 designs available.
- Blade & screw terminal types.
- Multi-voltage.
- Voltage: 6-36V
- Body: Die-cast
-
Terminals: Blade
Screw
Catalogue Downloads
- Marine model.
- Polymer body.
- Multi-voltage.
- Voltage: 6-36V
- Terminals: Screw
- Body: Polymer
- IP Rating: IP65
Catalogue Downloads
- 2, 4 & 6 button models.
- Waterproof model available.
- Multi-voltage.
- Hoist Push Button series used for indirect switching.
- Voltage: 12-24V
- Circuitry: Normally Open Momentary
- Body: ABS
-
Current Rating: 2, 4 & 6 Button 5A
4 button Waterproof 10A
Catalogue Downloads
- Pendant Control configurable to personal requirements.
- Sold as individual components.
- Engraved face plate on request.
- Housing Material: Polyurethane
-
Materials: Face Plate
Aluminium Composite
Catalogue Downloads
- Recommended for use with pendant controls.
- 7 core in 3 configurations with tangent tails.
- Moulded N12 plug on axial tail model.
- Voltage: 12-24V
- Plug: N12 moulded to cable
Catalogue Downloads
- Compatible with a wide range of substances including air, motor oils, transmission oils, fuels and other similar petroleum based liquids and gases.
- Water compatible model on request.
- Single pole change over.
- Robust, compact design suitable for harsh environments.
- Tolerates high pressure spikes.
- Supplied with 6.3mm blade terminals.
- Voltage: 6-24V
- Circuitry: SPCO
- Proof Pressure: 500 PSI
- Current Rating: 8A @ 12V
- Terminals: #8-32 screws & 6.3mm blade
- Connection: 1/8 - 27 NPT Male
- Base: Brass
- Body: Glass reinforced polyester
- Diaphragm: Polyimide film
-
Switch Contacts: Silver Alloy
Gold Plated - Operating Temp: -40°C to 120°C
- Approvals: CE, UL
- Note: 4-60 PSI Models
