Switching Systems
- 4 output, user programmable remote switching system.
- Palm-sized fob.
- Up to 90 metre range.
- Rolling codes, secure encryption.
- Multiple transmitters able to be paired with single receiver.
- All 4 outputs can be momentary or latching.
- Hard-wired interlock feature on 2 outputs.
- Typical Range: 90m
- Frequency: 433 MHz
- Current Rating: 5A max. per output
- Battery: Fob 1 x CR2032
- Transmitter Battery Life: 100,000 Activations
- Cable Length: 300mm
- Encryption: Rolling Codes
Catalogue Downloads
- AS2809 compliant rollover switch.
- Solid state electronics.
- Microprocessor controlled.
- Multi-voltage.
- Senses vertical & horizontal axis through an accelerometer (angle and G-force sensing device).
- Conducts system self-tests without shutdown.
- EMF spike suppression.
- Voltage: 10-30V
- Housing Material: Die-cast
- Compliance: AS2809
Catalogue Downloads
- Determines when there’s an unsafe lean on a raised tipper body.
- Solid state electronics.
- Microprocessor controlled.
- Multi-voltage.
- Data logs the last 15 activations.
- Conducts system self-tests.
- Voltage: 10-30V
- Housing Material: Die-cast
- Connected Ingress Protection: IP65
Catalogue Downloads
- Three-minute engine idle timer.
- Positive and negative shut-down output.
- Integrated hand brake alarm function.
- Hand brake input self-learn function.
- Multi-voltage.
- LED indicators for visual warning.
- Supplied with TE DEUTSCH connector kit.
- Voltage: 12–24V
- Timer Delay: 3 Minutes
- Enclosure: Polycarbonate
-
Output: Ignition 8A
Auxiliary 1A - Approvals: C-Tick
- Operating Temp: -40°C to 85°C
Catalogue Downloads
- Visual & audible warning device for water/coolant level monitoring.
- LED indicator on modules.
- 7 second “slosh” delay preventing false triggering.
- Epoxy encapsulated modules.
- Brass sleeve or rubber multi-fit style probes available.
- Voltage: 12-24V
-
Sensing Depth: Muli-fit Probe 25mm
Threaded Probe 35mm - Current Rating: 10A
Catalogue Downloads
- Selectable idle time cycle.
- LED indicators for visual warning.
- Multi-voltage.
- Environmentally sealed - IP65.
- Push & toggle switch kits available.
- Suitable for Energised To Run (ETR) systems.Energised To Stop (ETS) model available on request.
- Voltage: 9-35V
- Weight: Controller Unit - 255g
- Housing Material: ABS
- Output: Ignition - 10AAuxiliary - 0.7A
- Ingress Protection: IP65
- Approvals: CE, C-Tick
- Operating Temp: -40°C to 85°C
Catalogue Downloads
- Selectable frequency via DIP switches.
- Designed to work with all standard signal inputs e.g. magnetic pick up, computer signal, ignition coil, sensor.
- Ground signal sent once predetermined frequency has been reached.
- Adjustable hysteresis to help prevent chattering at the switch point.
- LED indicates activation.
- Epoxy filled for enhanced moisture & vibration protection.
- 12 or 24 volt operation, selectable via DIP switch.
- Voltage: 12-24V
- Current Rating: 2 x 10A @ 12V
- Hysteresis: Adjustable
- Input Frequency: 10 - 12,000Hz
-
Input Signal: Sine
Square Wave - Input Voltage: 1.5VAC - 50VAC
Catalogue Downloads
- Allows for the installation of electrial accessories to late model vehicles without creating additional load, avoiding system errors and fault codes.
- Electronically monitored switch module with inbuilt circuit monitoring and protection.
- Each output surge protected to 8A.
- 6 inputs, 6 outputs – 12V.
- 5 inputs, 5 outputs – 24V.
- Compact design.
- Save space and installation time.
- Eliminates excess wiring.
- Multi-voltage.
- Epoxy filled for enhanced moisture and vibration protection.
- Voltage: 12-24V
-
Inputs: 6 x 12V
5 x 24V -
Outputs: 6 x 12V
5 x 24V - Current Rating: 7A Max. Per Output20A Total Output
- Switch: Positive
- Housing Material: ABS
- Cable Length: 120mm
- Operating Temp: -40°C to 85°C
Catalogue Downloads
- Developed to control lighting and other electronic automotive accessories.
- Incorporates the latest in onboard circuit protection and monitoring technology.
- 3 user configurable master switches.
- All switches can be set to latching or momentary.
- Mounting point on back of switch panel – use with common 1/4" thread adjustable mounts.
- Epoxy encapsulated receiver module for enhanced moisture and vibration protection.
- Includes 4 decals.
- 8 outputs (6A each).
- Multiple outputs can be combined to allow switching of high current loads.
- Eliminates excess wiring.
- Multi-voltage.
- Compact design.
- Voltage: 10-24V
-
Circuits: 8 Individual
3 Programmable -
Current Rating: 6A Max. per circuit
40A Total - Materials: ABS
- Controller Harness: 4.5m
- Operating Temp: -40°C to 85°C
-
Note: Kit Contents:
1 x Switch Panel
1 x Receiver Module
4 x Overlay Function Decals
