Electronics
- Galvanic isolated ideal fo use with communications, entertainment & navigation systems.
- High efficiency & long life.
- Easy to install.
- Transient, short circuit, over voltage & over temperature protected.
- 2 year warranty.
- Input Voltage: 12V
- Inputs: 1 x Battery
- Outputs: 1 Circuit
- Output Voltage: 24V
- Current Rating: 7.5A
- Approvals: C-Tick
- Protects batteries being completely discharged from non-essential loads potentially denying engine cranking power.
- Protects from overvoltage – shuts down over 16V (12V mode), 32V (24V mode).
- Microprocessor controlled with 10 different selectable under voltage thresholds for 12V and 24V.
- LED for output status (on/off) and programming.
- Programmable delayed alarm output.
- Programmable delayed load disconnect.
- Made in Europe.
- Voltage: 12/24V
- Amps: 200–210 Max. Load
- Cable Size: 50mm²
- Ingress Protection: IP66
- Approvals: CE, C-Tick
- Weight: 730g
Catalogue Downloads
- Complete battery status information at a glance (%, V, A, Ah, W, h:m, °C).
- Supports up to three battery banks (12V, 24V and 48V).
- Very simple ‘Plug and Play’ installation.
- Programmable alarm contact.
- All wiring included (excluding battery cables).
- Compatible with lead based and lithium batteries (LiFePO4).
- The inputs for battery bank 2 and 3 can also be configured for other purposes – keyswitch input, mid-point voltage measurement, setup lock or backlight control.
- Measure DC currents up to 600A (500A continuous) and voltages up to 70VDC.
- Voltage: 7-70VDC
- Current Draw: 10mA @ 12V
- Battery: Capacity – 10 to 10,000Ah
- Approvals: CE
- Operating Temp: -20°C to 50°C
- Integrated accelerometer for pitch & roll measurements.
- 3 stage configurable warning and alarm.
- Internal buzzer.
- Multi-voltage.
- Full colour display.
- Compact size.
- Made in Australia.
- Voltage: 9-36V
- Body: ABS
- Connector: 1.9m lead to cigar plug
- Approvals: CE, C-Tick
- Weight: 90g
- Operating Temp: -40°C to 85°C
Catalogue Downloads
- IONNIC 2 output 5V Voltage Regulator conveniently housed in a TE Connectivity – DEUTSCH DT Series 4 contact receptacle.
- Ideal for use with sensors and small electonic devices.
- 9–36V input.
- 2 x 5V outputs.
- 150mA maximum combined output.
- Reverse polarity protected.
- Mates with DEUTSCH DT06-4S plug.
- Gold plated size 16 contacts.
- Environmentally sealed – IP68, IP6K9K, when installed to manufacturer’s specifications.
- Input Voltage: 9–32V
- Output Current: 150mA combined
- Output Voltage: 5V
- Contacts: Size 16 gold plated
- IP Rating: IP68/69K
- Housing Material: Thermoplastic
- Connector: Mating – DT06-4S
Catalogue Downloads
- Auto voltage detection.
- Model to suit Lithium LiFePo4 or lead-acid batteries.
- Microprocessor controlled.
- Fully automatic – keeps stored batteries charged.
- Multi-stage charging for added precision, safety and battery life.
- Float-mode monitoring – automatically maintains optimum battery charge.
- Insulated clamps and fused ring leads.
- Charging status LED.
- Reverse polarity, safety shut-off and spark proof, thermal runaway, ventilation system.
- Scrolling digital message on most models.
- Hook attachment on all models.
- Protection bumpers.
- 2 year warranty.
- Input Voltage: 230VAC
- Frequency: 50Hz
- Outputs: 1
-
Output Current: 6/12V Models
1 & 2A
12V Model
3A
Catalogue Downloads
- Microprocessor controlled.
- Fully automatic – keeps stored batteries charged.
- Multi-stage charging for added precision, safety and battery life.
- Float-mode monitoring – automatically maintains optimum battery charge.
- Insulated clamps and fused ring leads.
- Charging status LED.
- Reverse polarity, safety shut-off and spark proof, thermal runaway, ventilation system.
- Scrolling digital message on most models.
- Hook attachment on all models.
- Protection bumpers.
- 2 year warranty.
- Input Voltage: 230VAC
- Frequency: 50Hz
- Outputs: 1
-
Output Current: 12V Models
6, 10 & 15A
24V Model
10A
Catalogue Downloads
- Microprocessor technology – no time delay.
- 12V and 24V models available.
- Incorporates over-ride function for manual control.
- In-cab control & indication.
- 2 axle 12A output capability.
- Plug & play installation.
- Detachable mounting bracket.
- Compatible with both single and dual axle applications.
- Voltage: 12 & 24V Models
- Axle: 1 to 2
- Approvals: C-Tick
- Microprocessor technology – no time delay.
- Incorporates over-ride function for manual control.
- In-cab control & indication.
- Up to 4 axle control.
- Plug & play installation.
- Proportional brake controls for smooth and consistent braking.
- Detachable mounting bracket.
- 5 year warranty.
- Voltage: 12V
- Axle: 1 to 4
- Microprocessor-controlled battery isolator designed for use in multi-battery applications.
- Cost-effective protection against a flat battery.
- Cooler operating temperature compared to standard solenoid.
- Silver alloy contacts for longer life.
- Power saving technology.
- Surge-protected.
- 2 Year warranty.
- Voltage: 12V
- Current Rating: 200A
- Contacts: Silver Alloy
- Body: Polymer
- Operating Temp: -40°C to 60°C
