Monitors
- Displays voltage, current, consumed amp hours, remaining battery capacity and time remaining.
- 2 battery inputs.
- Configurable alarm relay.
- 500A shunt included.
- Ideal for service vehicles, forklifts, solar power systems, trailer homes, industrial systems and marine applications.
- 5 year warranty.
- Made in Europe.
- Voltage: 9-35VDC
-
Voltage Display: Main
0 to 35VDC
Auxiliary
2 to 35VDC - Current Draw: 9mA @ 12VDC
- Capacity Display: 20 to 999Ah
- Approvals: RoHS
- Weight: 145g
- Operating Temp: -20°C to 50°C
- Complete battery status information at a glance (%, V, A, Ah, W, h:m, °C).
- Supports up to three battery banks (12V, 24V and 48V).
- Very simple ‘Plug and Play’ installation.
- Programmable alarm contact.
- All wiring included (excluding battery cables).
- Compatible with lead based and lithium batteries (LiFePO4).
- The inputs for battery bank 2 and 3 can also be configured for other purposes – keyswitch input, mid-point voltage measurement, setup lock or backlight control.
- Measure DC currents up to 600A (500A continuous) and voltages up to 70VDC.
- Voltage: 7-70VDC
- Current Draw: 10mA @ 12V
- Battery: Capacity – 10 to 10,000Ah
- Approvals: CE
- Operating Temp: -20°C to 50°C
- Protects batteries being completely discharged from non-essential loads potentially denying engine cranking power.
- Protects from overvoltage – shuts down over 16V (12V mode), 32V (24V mode).
- Microprocessor controlled with 10 different selectable under voltage thresholds for 12V and 24V.
- LED for output status (on/off) and programming.
- Programmable delayed alarm output.
- Programmable delayed load disconnect.
- Made in Europe.
- Voltage: 12/24V
- Amps: 200–210 Max. Load
- Cable Size: 50mm²
- Ingress Protection: IP66
- Approvals: CE, C-Tick
- Weight: 730g
