Minebars

  • Designed and manufactured in Australia.
  • Multiple mounting options available.
  • Self-Adjusting & Fixed Volume bbs-tek or tonal reverse alarms on selected models.
  • Models also available with forward facing turn signal LEDs.
  • All minebars equipped with ADR approved IONNIC LED combination lamps - stop, tail, indicator & reverse lamps.
  • Extruded aluminium bar providing greater strength and adaptability.
  • Stepped edge allows for the use of Rhino-Rack® mounting kits.
  • Mounting channel runs entire length of bar allowing virtually unlimited mounting options.
  • 12V, 24V and multi-voltage versions available.
  • Base: Anodised Aluminium
  • Harness: 4m
  • New streamline minebar range featuring all premium products including:
    –  IONNIC 103 LED beacon.
    –  Brigade tonal reverse alarms.
  • Designed and manufactured in Australia from high quality components.
  • All minebars equipped with ADR approved IONNIC LED combination lamps – stop, tail, indicator & reverse lamps. 
  • Extruded aluminium bar providing greater strength and adaptability.
  • Dual magentic mounts for low speed application only.
  • Multi-voltage.
  • Voltage: 12-24V
  • Length: 750mm
  • Beacon Type: IONNIC 103 LED
  • Reverse Alarm: Brigade Tonal 97dB(A)
  • Signal Lamp Type: IONNIC Slimline LED
  • Mount: Dual vacuum magnetic
  • Base: Anodised Aluminium
  • Harness: 4m
  • New streamline minebar range featuring all premium products including:
    –  IONNIC 103 LED beacon.
    –  Brigade tonal reverse alarms.
  • Designed and manufactured in Australia from high quality components.
  • All minebars equipped with ADR approved IONNIC LED combination lamps – stop, tail, indicator & reverse lamps. 
  • Extruded aluminium bar providing greater strength and adaptability.
  • Multi-voltage.
  • Voltage: 12-24V
  • Length: 750mm
  • Beacon Type: IONNIC 103 LED
  • Reverse Alarm: Brigade Tonal 97dB(A)
  • Signal Lamp Type: IONNIC Slimline LED
  • Base: Anodised Aluminium
  • Harness: 4m
  • New streamline minebar range featuring all premium products including:
    –  IONNIC 103 LED beacon.
    –  Nordic CANIS GO 410 worklamp.
    –  Brigade tonal and bbs-tek reverse alarms.
  • Designed and manufactured in Australia from high quality components.
  • Models also available with forward facing turn signal LEDs.
  • All minebars equipped with ADR approved IONNIC LED combination lamps – stop, tail, indicator & reverse lamps. 
  • Extruded aluminium bar providing greater strength and adaptability.
  • Stepped edge allows for the use of Rhino-Rack® mounting kits.
  • Multi-voltage.
  • Voltage: 12-24V
  • Length: 1500mm
  • Beacon Type: IONNIC 103 LED
  • Worklamp: Nordic CANIS GO 410
    Flood pattern
  • Reverse Alarm: Brigade Tonal 97dB(A)
  • Signal Lamp Type: IONNIC Slimline LED
  • Base: Anodised Aluminium
  • Harness: 4m
  • New streamline minebar range featuring all premium products including:
    –  IONNIC 103 LED beacon.
    –  Nordic CANIS GO 410 worklamp.
    –  Brigade tonal and bbs-tek reverse alarms.
  • Designed and manufactured in Australia from high quality components.
  • Models also available with forward facing turn signal LEDs.
  • All minebars equipped with ADR approved IONNIC LED combination lamps – stop, tail, indicator & reverse lamps. 
  • Extruded aluminium bar providing greater strength and adaptability.
  • Stepped edge allows for the use of Rhino-Rack® mounting kits.
  • Multi-voltage.
  • Voltage: 12-24V
  • Length: 1500mm
  • Beacon Type: IONNIC 103 LED
  • Reverse Alarm: Brigade Tonal 97dB(A)
  • Signal Lamp Type: IONNIC Slimline LED
  • Base: Anodised Aluminium
  • Harness: 4m
  • New streamline minebar range featuring all premium products including:
    –  IONNIC 103 LED beacon.
    –  Nordic CANIS GO 410 worklamp.
    –  Brigade tonal and bbs-tek reverse alarms.
  • Designed and manufactured in Australia from high quality components.
  • Models also available with forward facing turn signal LEDs.
  • All minebars equipped with ADR approved IONNIC LED combination lamps – stop, tail, indicator & reverse lamps. 
  • Extruded aluminium bar providing greater strength and adaptability.
  • Stepped edge allows for the use of Rhino-Rack® mounting kits.
  • Multi-voltage.
  • Voltage: 12-24V
  • Length: 1275mm
  • Beacon Type: IONNIC 103 LED
  • Worklamp: Nordic CANIS GO 410
    Flood pattern
  • Reverse Alarm: Brigade Tonal 97dB(A)
    Brigade bbs-tek 92dB(A)
  • Signal Lamp Type: IONNIC Slimline LED
  • Base: Anodised Aluminium
  • Harness: 4m
  • New streamline minebar range featuring all premium products including:
    –  IONNIC 103 LED beacon.
    –  Nordic CANIS GO 410 worklamp.
    –  Brigade tonal and bbs-tek reverse alarms.
  • Designed and manufactured in Australia from high quality components.
  • Models also available with forward facing turn signal LEDs.
  • All minebars equipped with ADR approved IONNIC LED combination lamps – stop, tail, indicator & reverse lamps. 
  • Extruded aluminium bar providing greater strength and adaptability.
  • Stepped edge allows for the use of Rhino-Rack® mounting kits.
  • Multi-voltage.
  • Voltage: 12-24V
  • Length: 1275mm
  • Beacon Type: IONNIC 103 LED
  • Reverse Alarm: Brigade Tonal 97dB(A)
    Brigade bbs-tek 92dB(A)
  • Signal Lamp Type: IONNIC Slimline LED
  • Base: Anodised Aluminium
  • Harness: 4m

The new IONNIC Minebar range is once again setting the standard for industrial design incorporating the highest quality components available. 

The core range is now all LED and multi-voltage utilising components from industry leaders NORDIC LIGHTS and BRIGADE.

Our dedicated anodised aluminium extrusion provides a platform for a consistent high quality build that can be customised to specific site requirements and allows for range of universal and vehicle specific mounting options.

Manufactured here in Australia for local conditions.

  • Voltage: 12-24V
  • Material: Anodised aluminium
  • Harness: 4m
  • Developed to control lighting and other electronic automotive accessories.
  • Incorporates the latest in onboard circuit protection and monitoring technology.
  • 3 user configurable master switches.
  • All switches can be set to latching or momentary.
  • Mounting point on back of switch panel – use with common 1/4" thread adjustable mounts.
  • Epoxy encapsulated receiver module for enhanced moisture and vibration protection.
  • Includes 4 decals.
  • 8 outputs (6A each).
  • Multiple outputs can be combined to allow switching of high current loads.
  • Eliminates excess wiring.
  • Multi-voltage.
  • Compact design.
  • Voltage: 10-24V
  • Circuits: 8 Individual
    3 Programmable
  • Current Rating: 6A Max. per circuit
    40A Total
  • Materials: ABS
  • Controller Harness: 4.5m
  • Operating Temp: -40°C to 85°C
  • Note: Kit Contents:
    1 x Switch Panel
    1 x Receiver Module
    4 x Overlay Function Decals